双向光收发组件探测器端耦合和封装工艺分析

探测器响应度直接影响双向光收发组件（bi-directional optical sub-assembly，BOSA）的性能，探测器端的耦合和封装在BOSA生产中占据重要地位。为了系统分析BOSA生产中各偏移因素对探测器端耦合的影响，选择探测器电流响应度作为耦合标准进行实验，并通过分析实验结果来得出BOSA探测器端耦合和封装过程中的改进措施。参考BOSA的实际光路，建立光纤-波片-芯片耦合模型，模拟了光束偏移与耦合效率的关系；研究了BOSA耦合和封装工艺中产生的偏移，并分析它们对探测器端耦合效率的影响。随后使用自动耦合设备，对BOSA探测器端进行耦合实验，并分析波片角度偏移、波片与探测器透镜的高度差、探测器透镜水平偏移对耦合效率的影响。实验结果表明：探测器透镜水平偏移对耦合效率的影响最大，波片角度偏移、波片与探测器透镜的高度差对耦合效率的影响较小。研究结果为BOSA探测器端的耦合和封装提供了系统的理论指导，对BOSA的实际生产有一定参考价值。     

The short- and long-run efficiency of energy,precious metals,and base metals markets: Evidence from the exponential smooth transition autoregressive models

The aim of this paper is to investigate the long and short-run relationship between spot and futures prices of the energy, precious metals, and base metals markets. We analyze daily data from January 1985 to February 2019. The empirical findings based on the cointegration test, which follows a nonlinear process, suggest that the spot prices of energy and metals assets have long-run relationships with their futures prices. Nonparametric Granger causality test results also indicate bi-directional causality among futures and spot prices. These findings indicate that the energy and metals markets are informationally efficient in the sense of Fama (1970).     

基于α-FeOOH催化H2O2蒸气的低温烟气脱硝实验

针铁矿是分布广泛、储量丰富的铁氧化物，其主要成分为α-羟基氧化铁（α-FeOOH）。为了探究针铁矿在催化H₂O₂烟气脱硝反应中的性能，本文通过沉淀-水解法制备了α-FeOOH，并在自行搭建的实验台上开展了α-FeOOH催化H₂O₂的低温烟气脱硝实验研究，深入分析了H₂O₂流量、H₂O₂浓度、汽化温度、反应温度和共存气体浓度等工况参数对脱硝性能的影响。采用离子色谱（IC）分析了单独脱硝反应和同时脱硫脱硝反应后的含氧酸成分，结合各项表征分析技术考察了催化剂反应前后的理化特性和稳定性。实验结果显示，随着汽化温度和反应温度的升高，NO的脱除效率先增加后降低；增加H₂O₂浓度对脱硝效率有明显的促进作用。当汽化温度为140℃、反应温度为160℃时，以2.5mL/h注入10mol/L的H₂O₂脱硝效率达到80%。当SO₂浓度为1000μL/L时，脱硝效率提高至86.4%。离子色谱分析结果显示，单独脱硝反应和同时脱硫脱硝反应后含氧酸产物为HNO₃和H₂SO₄。反应前后催化剂的表征结果显示，α-FeOOH在脱硝反应后依然具有良好的稳定性，显示出针铁矿在低温烟气脱硝工艺中的潜在应用前景。     

往复式活塞压缩机中间喷液制冷系统的(火用)分析

通过对往复式活塞压缩机进行改造，在单级活塞压缩系统的基础上搭建了一种中间喷液冷却的准两级压缩系统并在蒸发温度为-20 ℃的工况下进行实验测量，根据实验数据对单级活塞压缩系统和新型中间喷液冷却活塞压缩系统的COP、〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失和〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗效率进行计算。结果表明：加入中间喷液冷却系统后，系统的COP由1.27提升至1.36，单位制冷量由155.1 kJ/kg提升至176.7 kJ/kg；单级活塞压缩系统〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失较大的部分是压缩机和膨胀阀，分别占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的16.2%和14.8%，加入中间喷液冷却系统后压缩机部分的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失明显降低，仅占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的3.6%，冷凝器及膨胀阀的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损比也有所下降。     

Passive micromixer with baffles distributed on both sides of microchannels based on the Koch fractal principle

Since the beginning of the 21st Century, the development of microfluidic chip technology has been very rapid and has attracted the attention of more and more scholars. As an important part of the microfluidic chip, the performance of the micromixer is critical. The fractal structure in the microchannels helps to improve the mixing performance of the micromixer and improve the mixing efficiency of the micromixer. The research results of other scholars are of great significance to the research of the present paper, which mainly studies the effect of changing the baffle state on the mixing efficiency of the micromixer based on the Koch fractal principle. Through simulation analysis, it was found that the mixing efficiency of the baffles distributed on both sides of the microchannel was higher than the mixing efficiency of the baffles distributed on the microchannel side. When the distance between adjacent baffles was divided into 0.15, 0.25 and 0.35 mm, simulated data suggested that the baffle distance of 0.15 mm was best. Increasing the number of baffles from six to eight groups increased the mixing path of the fluid in the microchannel and improved mixing efficiency. A comparison of mixing efficiencies of the 0°, 15° and 30° baffle angles revealed that very significant improvement in mixing efficiency was obtained at 30°. © 2019 Society of Chemical Industry     

Electroactive polythiophene/polystyrene bottlebrushes as morphology compatibilizers in photovoltaic systems

Poly(3‐thiophene ethanol) (P3ThEt)‐graft‐polystyrene (PSt) bottlebrushes were synthesized and applied in active layers of poly(3‐hexylthiophene) (P3HT):phenyl‐C71‐butyric acid methyl ester (PC71BM) solar cells as morphology compatibilizers. In the presence of 15 wt% of P3ThEt‐graft‐PSt bottlebrush compatibilizers, the P3HT crystallite dimensions (D₍₁₀₀₎ = 45.67 nm and D₍₀₂₀₎ = 30.12 nm) and R_mean (38.96 nm) of PCBM clusters were the largest and the layer spacings were all the smallest (d₍₁₀₀₎ = 1.054 nm, d₍₀₂₀₎ = 0.301 nm and d_(PCBM) = 0.406 nm). These dimensional properties led to better hole (1.9 × 10^?3 cm² V^?1 s^?1) and electron (1.2 × 10^?2 cm² V^?1 s^?1) mobilities. The content of bottlebrushes was optimized at 15 wt%, and thereby the best photovoltaic results including the maximum cell efficiency of 5.37% were obtained for this turning point (12.75 mA cm^?2, 61%, 0.69 V). On exceeding the optimum weight percentage, all photovoltaic parameters decreased markedly and reached even less than that of pristine devices (1.92% versus 2.24%). After an optimum weight percentage of compatibilizers, further enhancement in bottlebrush content in active layers saturated and finally oversaturated the system and, consequently, the cell parameters significantly decreased. Accumulation of bottlebrushes in interfaces and donor/acceptor phases ruined the system function even with large and packed P3HT crystallites and PC71BM clusters. © 2019 Society of Chemical Industry     

超生雾化降尘研究及应用

为解决某矿破碎筛分车间粉尘污染问题，采用喷嘴雾化理论设计喷嘴雾化降尘实验，并根据实验结果在该矿破碎筛分车间应用了超声雾化降尘技术。实验及应用结果表明：超声雾化发生器的液体雾化装置，气体辅助雾化装置和雾束形成器的几何结构影响喷雾的雾化参数与流量特性，液体雾化器与气体辅助雾化装置影响液体初次破碎与雾化，雾束形成器影响雾滴的二次破碎与约束液束形态；超声雾化发生器的气液比与气液压力比存在幂函数关系，幂指数为-1.09；雾滴粒径越小，雾滴的降尘效率越高，当雾滴D50为23 μm时，雾滴的降尘效率在94%以上；在破碎筛分车间振动筛给料皮带和筛上皮带受料点布置超声雾化发生器，超声雾化发生器开启后，车间内粉尘浓度降低至586～10.54 mg/m3，降尘效率在71.38%以上。     

高等级生物安全实验室通风空调系统冗余设计原则探讨

对比分析了国内外标准有关高等级生物安全实验室通风空调系统冗余设计的要求。结合我国已有高等级生物安全实验室,重点分析了送风机、排风机、排风高效过滤器冗余设计的具体实施形式和存在的问题,给出了冗余设计原则建议。     

三种硫化氢吸收剂吸收效率对比及碘酸钾体系吸收条件优化研究

硫化氢具有腐蚀性与毒性，采用吸收剂吸收硫化氢气体是重要的脱硫处理方式。不同的吸收剂在吸收效率上存在较大差别。首先对比了三氯化铁体系、碘酸钾体系和碱性铁氰化钾体系三种不同硫化氢吸收剂的吸收效率。在此基础上重点优化了碘酸钾体系吸收条件参数，讨论了包含浓度、温度、pH、气体流量及时间等因素对硫化氢吸收效率的影响。并建立了四因素三水平正交试验研究较优吸收条件，得到正交试验优化吸收条件为：温度55℃，pH 6.01，硫化氢流量0.3 L·min^-1，吸收时间1 min，该条件下8%（质量）碘酸钾体系的三级吸收效率为51.56%。研究结果对硫化氢吸收处理提供了理论参考，也为间接电解法循环处理研究提供了支持。     

刚果(金)高泥氧化铜矿的絮凝沉降试验研究及技改应用

本文以刚果(金)高泥氧化铜浸出矿浆为试验对象,进行了有机高分子聚丙烯酰胺的选型试验,探究了最佳沉降效果下浸出矿浆浓度、絮凝剂种类和用量等参数指标,再针对浓密机结构进行优化改造,并取得了较好的效果。结果表明：选择1800-2300万分子量的AN905型的絮凝剂,能满足高泥氧化铜矿的生产浓缩作业要求；根据沉降试验,生产浸出矿浆浓度为20%,絮凝剂作用的沉降效果最佳,单耗为100g/吨矿；改造浓密机中心筒高度、改变絮凝剂投加方式和调整絮凝剂添加点,能有效解决高泥氧化铜浸出矿浆在浓缩过程中的絮凝沉降问题,减少有价金属量的溢流损失,降低絮凝剂用量,进一步提高生产矿石处理量,实现企业良好的经济效益。